Showing all 2 results
TECH TRI-Band Radio for Amateur USEThe UV-5R Tri-Band is for use on amateur frequencies. The UV-5R Tri-Band is able to Transmit on Narrowband (12.5kHz) and Wideband (25kHz). Tri-Band Radio: 136-174mhz (VHF), 220-260mhz, 400-520.99mhz (UHF)
BFTECH BF-F8X3 Tri-Band 8 Watt VHF 1.25M UHF 136-174/220-260/400-520Mhz Portable Amateur Ham Two Way Radio
- The BF-F8X3 Tri-Band is able to Transmit on Narrowband (12.5kHz) and Wideband (25kHz). Tri-Band Radio: 136-174mhz (VHF), 220-260mhz, 400-520.99mhz (UHF)
- DTMF Remote CommandsThe BF-F8X3 Tri-Band can respond to remote commands. By remotely sending DTMF tones you can both ‘Stun’ (Transmit Disable) or ‘Kill’ (Disables all functions) the UV-5R Tri-Band. You also can ‘Revive’ a BF-F8X3 Tri-Band from its “stunned” or “killed” state. You can also remotely turn on the microphone through ‘Monitor’, or ensure the radio is within range by using ‘Inspect’ (replies with a confirmation tone when it is within range).
- Dual Watch ReceiverThe BF-F8X3 Tri-Band has one built-in receiver but can “watch” two channels (semi-duplex). Monitor two different frequencies (even on different bands (VHF/UHF)) and the radio will monitor both frequencies giving priority to the first station to receive an incoming call.
- Group Tones supportedThe BF-F8X3 Tri-Band supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the BF-F8X3 Tri-Band supports the latest standards
- There are 128 programmable memory channels. You can add or remove channels from scanning list using the free computer software. You can give channels alphanumeric names, using a computer. The radio has 2 power levels (8 watts maximum), allowing you to choose how far you can communicate. You can set VFO limits using the CHIRP software. You can easily program from a PC to set-up the radio to operate exactly as needed.